Construction

Includes tools, security components, fire safety, lifting components, and valves.


Product Name: Fire Suppression Splitter

Application: Sprinkler head for a fire protection system commonly used in commercial and industrial buildings.

Description: The splitter is a critical component to the sprinkler head. It interrupts the water flow by converting the water stream to a controlled spray that covers a specified area.

Dimensions: 1 inch overall length by .482 inch diameter.

Material: 1/2 hard 360 Brass.

Tolerances: ± .003 inch with some dimensions held to .001 inch total tolerance.

Finishes: No special finish.

Fabrication: Single spindle Swiss type screw machine.

Special Features: Compound angles at spray point critical to convert the solid stream of water to a controlled spray.


Product Name: Bulb Seat

Application: Fire sprinkler system sprinkler head component.

Description: A small valve seat used in a sprinkler.

Dimensions: .280 inch diameter by .156 inch high.

Material: Phosphor Bronze

Tolerances: ± .003 inch typical with some dimensions held to ± .0015 inch.

Finishes: No special finishes.

Fabrication: Single spindle Swiss screw machine.

Special Features: Precision radius inside the part forms a rounded cup for precision component placement.


Product Name: Pivot Shaft Assembly

Application: Component for Laser Leveling Equipment.

Description: Two shafts designed to fit together and to make a mechanism that can accurately provide vertical and horizontal movement to leveling equipment. The primary shaft (left) has two perpendicular holes drilled, one of which receives the secondary shaft. The hole dimensions on the primary shaft are critical in order to permit a snug fit of the mating parts yet allow for rotation.

Dimensions: Primary shaft (left) measures 1.126 inch by 0.375 inch diameter. Secondary shaft (right) measures 0.858 inch by 0.250 inch diameter.

Material: AISI 303 Stainless Steel.

Tolerances: ± 0.005 inch with critical shaft dimensions held to within 0.0005 inch.

Finishes: 32 RMS finish on all shaft dimensions.

Fabrication: Swiss Auto CNC machine.

Special Features: No burrs allowed anywhere.


Product Name: Mounting Screw Insert

Application: Component for Laser Leveling Equipment.

Description: A custom threaded nut designed to insert in a non-metallic material and provide a strong attachment for mounting a .250-20 threaded fastener.

Dimensions: 16mm square with an overall length of 0.625 inch. The shaft measures 0.375 inch in diameter.

Material: 300 Series Stainless Steel.

Tolerances: ± 0.005 inch.

Finishes: None.

Fabrication: Swiss CNC machine.

Special Features: No burrs allowed anywhere.


Product Name: Lens Frame

Application: Component for Laser Leveling Equipment.

Description: A small precision part threaded internally at one end to hold and protect a lens. The part has external threads at the other end to mount in the laser equipment.

Dimensions: 0.362 inch length by 0.290 inch diameter.

Material: 2011T3 Aluminum Alloy.

Tolerances: ± 0.005 inch with some dimensions held to 0.001 inch.

Finishes: Black Anodized.

Fabrication: Single spindle Swiss screw machine.

Special Features: No burrs allowed anywhere.


Product Name: Pawl Release Pin

Application: A part used in a mechanical hoist assembly.

Description: A small cylindrical part with a taper at each end and a knurl in the center. Shown next to a one inch scale for size comparison.

Dimensions: 0.445 inch length with a 0.150 inch maximum diameter.

Material: 303 Stainless Steel.

Tolerances: ± 0.005 inch with one critical dimensions held to within 0.001 inch.

Finishes: No special finish.

Fabrication: Single spindle Swiss screw machine.

Special Features: No burrs allowed anywhere.


Product Name: Valve Needle

Application: Flow Control Valve.

Description: A small stainless steel part with threads at one end and a precision tapered finish at the other. Used as a needle in a flow control valve. Shown next to a one inch scale for size comparison.

Dimensions: 1.010 inch in length with a 0.125 inch maximum diameter in the center.

Material: 303 Stainless Steel.

Tolerances: ± 0.005 inch with some critical dimensions held to ± 0.0005 inch.

Finishes: No Special Finish.

Fabrication: Single Spindle Swiss.

Special Features: No burrs allowed anywhere.


Product Name: Lock Plunger

Application: Re-key mechanism in a mechanical locking device

Description: A main component in a lock which permits for rapid and frequent re-keying without the need for a locksmith.

Dimensions: Approximately .290 inch overall length x .095 inch diameter shaft.

Material: 360 Brass.

Tolerances: Many dimensions held within .0005 inch with some held within .0004 inch.

Finishes: No special finish.

Fabrication: Swiss type screw machine.

Special Features: High tolerance requirement calls for each seat to be within .0005 inch from the nose of the part with no tolerance buildup permitted. This precision part requires that no burs be allowed anywhere on the part to prevent malfunction of the re-keying mechanism.


Product Name: Retainer Pin

Application: Mechanical locking device.

Description: A small part that maintains alignment of the tumblers in a locking mechanism.

Dimensions: .250 inch by .083 inch platform with a .0514 diameter shaft and a .138 inch overall height.

Material: 303 Stainless Steel

Tolerances: ± .001 inch typical with some dimensions held to ± .0002 inch.

Finishes: No burrs allowed anywhere as small chips falling off the part could cause the lock mechanism to malfunction.

Fabrication: Single spindle Swiss screw machine.

Special Features: A ± .0002 dimensional integrity of the stem must be maintained through the de-burring process.


Product Name: Driver

Application: Mechanical lock.

Description: A small cupped component used as part of the inner workings of a lock.

Dimensions: .158 inch diameter by .235 inch length.

Material: Brass

Tolerances: ± .0025 inch typical.

Finishes: None

Fabrication: Single spindle Swiss screw machine.

Special Features: No burrs allowed anywhere.